Payment & Shipping Terms:
|Production Capacity:||0-15m / Min||Power ( W ):||18.5 - 22 Kw|
|Fixing Dimensions:||23,000 X 2,400 X 1,400mm||Material:||Galvanized / Steel Purpline|
|Product Range:||All The Types From 100 To 250||Coil Strength:||235-345 Mpa|
Manual Out Table Roof Tile Roll Forming Machine Good Performance
1) Can produce many sizes of U purlin machine
2) The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, C forming system, punching equipment, post-cutting equipment, hydraulic station, and controlling system
3) Fixing dimensions: 23,000 x 2,400 x 1,400mm
4) Total weight: about 13,000kg
5) Controlling system: PLC
6) Main motor power: 15kW
7) Hydraulic station power: 15kW
8) Quantity of stands: about 16 groups
9) Working speed: 8,000 - 10,000mm / min
10) Hydraulic pressure: 18 - 20MPa
11) Material of roller die: GCr15 bearing steel with quenched treatment
12) Material of cutting die: Cr12 mould steel with quenched treatment
13) Product range: all the types from 100 to 250
14) C purlin mainly use hot roll steel strip or hot dip galvanized steel strip at
thickness 1.5 - 3.2 mm; it is roll formed by C shape roll forming machine
15) Working flow: decoiling the sheet-sheet guiding -coil strip leveling-roll forming-punching for horizontal hole-punching for vertical hole-measure length-cutting the panel-panels to the supporter
16) The products of C shape purlin forming machine have excellent anti-bending property and are easy to instal
l17) They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factories, warehouses, garages, exhibition centers, cinemas, theatres and gardens.
1. 5T Hydraulic uncoiler
-- Single head to put the coil
2. sheet guiding
make sure the material is flat
3. Roll forming main machine
-- working speed: 10m—15m/min (not include cutting & punching time)
-- Roll forming: about 10 stations
-- Transmission: by chain
-- Machine adopt wall structure, thickness: 20mm
-- Machine adopt hydraulic after cutting
-- Cutting after forming: Cut the sheet after roll forming to required length
-- Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
-- Length measuring: Automatic length measuring
-- Tolerance of length: 3m +/- 1.5mm
5. Manual out table:
-- One out table with two support roller
6. PLC Control panel
-- Automatic length measurement:
-- Automatic quantity measurement
-- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
-- Length inaccuracy can be amended easily.
-- Control panel: Button-type switch and touch screen:
7. Hydraulic station
Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
8. Material of Main Equipment
GCr15 bearing steel, with quenching treatment.
Active Shaft Material
High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft.
PLC control panel, transducer imported from Mitsubishi of Japan.
Cr12 mould steel with quenched treatment.
Packaging & Delivery
1. Export standard package for container
about 40 days
U Purlin Machine are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factories,