Payment & Shipping Terms:
|Production Speed:||8-10m/min||Cutting Blade Material:||Cr 12 High Grade Steel|
|No.||main parameter of roll forming machine|
|1||Suitable to process||Color steel plate|
|2||Width of the plate||165mm|
|6||Thickness of the plate||0.3-0.6mm|
|8||Diameter of the roller||Φ38mm|
|10||Voltage||380V 50Hz 3phases|
|11||Material of the cutting plate||Cr12|
|13||Processing precision||Within 1.00mm|
manual uncoiler - roll forming machine - computer control system - hydraulic control system - cutting system - output table
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5T
Inner diameter: 500-508mm
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
Usage: It is used to support the steel coil and uncoil it in a turntable way.
Passive uncoil pulled by roll forming system
|Loading capacity||Uncoiling width||Inner diameter|
Usage: Put the raw material(steel plate) through the beach to manufacture and process,it can guarantee that the products are neat, parallel and everything is uniformity.Please refer to the equipment regulation to knowthe function of
locate angle iron.
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission,roller was chromed which can keep the molding plate surface smooth and not easy to be marked
when it is working
Feature : Ensure stability , precision and lifetime.
|No.||Main parameter of shutter door roll forming machine|
|1||Length of the main part||3300*800*1400mm|
|2||Weight of main part||3.2 t|
|3||Voltage||380V/50HZ3Phase (as customer’s request)|
|4||Roller fixer||Guide column|
Middle plate welded
|7||Drive mode||Gear or chain|
|8||Material of rollers||Gcr15|
|9||Material of shafts||45# steel with tempering|
|10||Diameter of shafts||φ40mm|
|11||Number of rollers||10 rollers|
|14||Main power||4kw (Cycloidal planetary gear speed reducer)|
Advanced hydraulic drive, automatic punching and cutting after forming, no distorting or wasting, high level safety factor.
|Blade Material||Cutting system|
|Cr12 steel with quenched treated 60-62°C||Full automatic|
|Text screen displayer||Taida DVP14ES from Taiwan||ENC-1-1-1T-24 from South Korea|
|Advanced hydraulic system from Taiwan||5.5kw|