Galvanized steel Heavy Duty Cable Tray Roll Forming Machine10-18m/min
Parameter: width of material: 225-1020mm thickness: 1-2mm; Inner diameter of coil: 508mm;inner expansion range: 480-520 mm; The maximal of Diameter: 1500mm; The Maximal of loading: ≤5T Motor power: 5.5kw frequency change control Press material type: pneumatic press material Feeding speed: 0-15m/min, adjustable
Leveling machine of Heavy Duty Cable Tray Roll Forming Machine
A: working roller: nine rollers type leveling machine
B: Feature of structure: after the quenching and tempering, chrome-plating processing, the rigidity, surface roughness of the roller etc. are all enhance greatly; It is composed by the clamping roller and the leveling roller, the clamping roller may the independent control, the leveler has one pair of horizontal guide roller and two pairs of vertical guider roller and easy to adjust by hand wheel. Between the leveler and the feeding device, there is optical sensor, sends out the feedback signal to the control system, the control system sends out the instruction to the frequency conversion motor to change speed, Achieves the uninterrupted level goal.
A: function: material feeding
b. Feature: Uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths. The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical parameters. The auto-induction start system and the punch press linkage (control punch press start).
Model of punching press: JF21-120B
Roll forming part
Forming station: 14sets
Forming variety: bridge frame
The diameter of the roller axis: 85mm
Cutting type: hydraulic cutting Blade type: close type die cavity cutter Hydraulic power:5.5kw Material of blade: Cr12, quench treatment, hardness HRC56-58 Quantity: 9 (depend on customer request)
Structure: roller type with no power Electric control system A: Full line is controlled by PLC control system,touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc.. B: Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency was stopped ensure the safe of the equipment and operator.