Colored Galvanized Steel Sheet Metal Roll Forming Machines 4 KW
Introduction of rib lath mesh machine
Angle protecting mesh was shaped through exoabsuib and stretch the two wings the
galvanized steel and stainless steel. Its wings can union with lime mud reliably it can
shape the smooth, straight, simple angle in the buildings. Meanwhile it can prevent the
angle from disruption, hit, destroy, be widely used I construction, decoration, it has the
effect of protection, easy to take shape and beautiful.
Main technical parameters of rib lath mesh machine
Inner diameter: 350
Outer diameter: 700
Material width: 485-500MM
Material thickness: 0.45mm galvanized steel
Loading weight: 2000kg
Servo motor: 1.5KW
Working speed: 450—500 strokes/minute or 10—20M/Minute
Punching Motor power: 5.5kw
Driven way: Chain and gear
Rolling passage: 7+2
Rolling thickness 0.45mm
Forming Motor power 5.5kw
Profiling mold: 45 Steel
Hydraulic cut: 7MPA 40L Tank
Lubricate: Center control
Control method: PLC
Electric element: Shneider
Machine size: 1120 X 600 X 1500 mm
Weight: 5300 KG
Installation size: 12570 x 2900x1500 m
Material of Main Equipment
High grade No.45 forged steel, coated with hard chrome.
Active Shaft Material
High grade No.45 carbon wrought steel,
which can improve the integrated mechanic feature of the shaft.
PLC control panel, transducer imported from Mitsubishi of Japan.
Other elements are from famous suppliers of China.
Cr12 mould steel with quenched treatment.
Components and Function
Coil Feeding Equipment Consists of one uncoiler with capacity of 3000kgs and its base. The mandrel can expand or shrink. With separate button to make the mandrel roll.
Guiding Equipment Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Roll forming system The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers with quenched treatment after being machined by the exact machining tool.
Hydraulic Station Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
PLC Control Panel Main parts imported from Mitsubishi. The operation is easy and steady and can be choose operation by manual or automatically.
Introduction of Rib Lath Shearing Roll Forming Machine
The machine is full-automatically controlled by PLC, the whole hydraulic transmission, drive hydraulic oil jar carry out and shear through center pump station towards the hole, hydraulic pressure Motortransmit power as main transmission. it' s reliable to operate steadily by hydraulic pressure, shear towards hole precision geometry form rule of the notch. Its hydraulic pressure transmission,to set correct and fit.
The cold roll forming machine can produce many types of Roof tiles, wall panels, frame profiles, rib lath.The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, punching equipment , pre-cutting equipment, C-shape forming system, hydraulic station, and PLC controlling system